1. Home
  2. Ürünlerimiz
  3. Endüstriyel Çeviriciler
  4. Ethernet Fiber Çeviriciler
  5. JetCon 1301 Slim-sized Fast Ethernet to Fiber Media Converter

JetCon 1301 Slim-sized Fast Ethernet to Fiber Media Converter

JetCon 1301 is a compact 1-port Fast Ethernet media converter designed as small as a cigarette box, making it an ideal model that would physically fit into a chassis with limited space, such as machinery control box and duct assembly room. It also supports switch forwarding mode with abnormal packet filtering and pure converter mode for extreme low latency requirement – fieldbus and EtherCAT, which needs invariant forwarding latency in 64~1522 bytes packet length. For easy maintenance and time-saving, JetCon 1301 features remote Link Loss Forwarding technology which provides remote link down signal forwarding, acknowledging link events occurred on each end of JetCon 1301. To activate forwarding mode and LLF functions, simply adjust DIP switch and reset the converter and the reconfiguration will be applied. For the field site harsh environmental installations such as vibrating machinery or duct assembly room applications, JetCon 1301 can be easily mounted directly onto DIN rail and powered with DC 18 ~ 32V IRU applications, where DC input is not available. Besides, for particular 48V DC industrial environments, JetCon 1301-48V model is available to be powered with DC 36~60V input. With the Ingress Protection grade 31 and rigid aluminum case, JetCon 1301 can survive and have excellent performance under -10~70o C temperature range, severe electromagnetic interference and outcoming vibration. The high MTBF value of over 500,000 hours, 5-year global warranty and endurable performance of JetCon 1301 series give you the reliable choices for hazardous applications.

Category:

JetCon 1301 Slim-sized Fast Ethernet to Fiber Media Converter

  • One 10/100 TX port to One 100FX port media converter

  • Dual Forwarding modes- Switching and Pure converter

  • Supports Auto MDI/MDI-X, Auto Negotiation

  • Supports Multi-mode 2KM, Single-mode 30KM

  • Auto Link Loss Forwarding for fault detection

  • Extreme Low Data Forwarding Latency- 1.6 x 10-6 Sec

  • Wide range of AC18-27V/DC18-32V and DC36-60 (JetCon 1301-48V) power inputs with DC polarity protection

  • Aluminum case with IP31 grade protection

  • Supports 1.5KV Hi-PoT isolation protection

  • Supports single fiber transmission – WDM

  • Operating temperature -10~70°C (-40~80°C wide operating temperature model available by request)

Technology
Standard: IEEE802.3 10Base-T,IEEE802.3u 100Base-TX
IEEE802.3u 100Base-FX,IEEE802.3x Flow Control and
Back-Pressure
Packet transfer mode:
Support Switch mode and Pure Converter mode. This
feature is select by DIP-switch.
The Switch mode will begin to forward the received data
only after it received the frame completely, the forwarding
latency depends on the packet length and the packet length
support 64 to 1600Bytes. The pure converter operating
algorithm is different with switch mode; it will direct transfer
Ethernet signal without any frame checking
Link Loss Forward: Enabled/Disabled by DIP-Switch 1
Hi-pot Testing: Passed AC1.5KV Hi-pot tesing on port-port,
power-case and port-power
Interface
Number of Ports: 1 x 10/100 Base-TX with Auto MDI/
MDI-X, Auto-Negotiation functions
1 x 100Base-FX
Connectors:
10/100 Base-TX: RJ-45
100Base-FX: Duplex SC for multi-mode or single-mode fiber
Power: 2-Pin Terminal Block
Cables:
RJ-45 connector: supports Cat.3, Cat.4, Cat.5
unshielded twisted pair or shielded twisted pair cable.
The link distance is maximum 100 meters
Fast Ethernet Fiber Transceiver:
SC connector: supports multi-mode or single-mode
optical fiber
Multi-mode fiber: 50/125um or 62.5/125um
Single-mode fiber: 8/125um, 9/125um or 10/125 um
JetCon1301-m, Multi-mode: 2KM (Max.)
Wave-length: 1310nm
Min TX Power:-19dBm
Max TX Power:-14dBm
Max RX Sensitivity:-30dBm
Link budget:11dBm
JetCon1301-s, Single-mode: 30KM (Max.)
Wave-length:1310nm
Max TX Power:-8dBm
Min TX Power:-15dBm
Max RX Sensitivity:-34dBm
Link budget: 19dBm
JetCon1301-s(WDM-A), Single-mode: 30KM (Max.)
Wave-length: TX 1310nm, RX 1550nm
Max TX Power:-3dBm
Min TX Power:-9dBm
Max RX Sensitivity:-31dBm
Link budget: 22dBm
JetCon1301-s(WDM-B), Single-mode: 30KM (Max.)
Wave-length: TX 1550nm, RX 1310nm
Max TX Power:-3dBm
Min TX Power:-9dBm
Max RX Sensitivity:-31dBm
Link budget: 22dBm

JetCon1301-m(48V), Multi-mode: 2KM (Max.)
Wave-length: 1310nm
Min TX Power:-19dBm
Max TX Power:-14dBm
Max RX Sensitivity:-30dBm
Link budget:11dBm
JetCon1301-s(48V), Single-mode: 30KM (Max.)
Wave-length:1310nm
Max TX Power:-8dBm
Min TX Power:-15dBm
Max RX Sensitivity:-34dBm
Link budget: 19dBm
Configuration DIP Switch:
DIP 1: Link loss forwarding Enable /Disable.
DIP 2: RJ-45 Auto-Negotiation/Forced 100Mbps Full
Duplex
DIP 3: Fiber Full Duplex/Half Duplex
DIP 4: Switch/Pure Converter mode.
Diagnostic LED:
System: Power (Green)
RJ-45 port: Link (Green ON)/Activity (Green Blinking)
Fiber port: Link(Green ON)/Activity(Green Blinking)
Power Requirements
System Power: 2 pins terminal block for power input with
auto polarity reverse.
JetCon1301: DC 24V (18~32V), 47~63Hz
JetCon1301-48V: DC 48V (36~60V)
Power Consumption:
JetCon1301: 3.5 Watts @ DC 24V(Maximum)
JetCon1301-48V: 4 Watts@ DC 48V(Maximum)
Mechanical
Installation: DIN-Rail mount
Case: Aluminum metal case with IP31 grade case
protection for drop-waterproof and dustproof.
Dimension:
70mm(H) x 30mm (W) x 89mm (D) ( with DIN rail clip)
70mm(H) x 30mm (W) x 80mm (D) ( without DIN rail clip)
Weight:
374g with package
292g without package
Environmental
Operating Temperature: -10 ~70OC
(JetCon 1301-w/1301-w(48V) -40~80OC)
Operating Humidity: 0% ~ 95% (non-condensing)
Storage Temperature: -40 ~ 80OC
Storage Humidity: 0%~ 95% (non-condensing)
Hi-Pot: AC1.5KV on port to port and port to power
Regulatory Approvals
EMI: FCC Class B, CE/EN55022.
EMC immunity interface:
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5,
EN61000-4-6, EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Vibration: IEC60068-2-6
Free Fall: IEC60068-2-32
MTBF: 506,819 Hours, MIL-HDBK-217F GB standard
Warranty: 5 years

DS_JetCon1301_V1.1

JetCon 1301-m Slim-sized Fast Ethernet to Fiber Media Converter, SC, Multi-mode/2KM

JetCon 1301-s Slim-sized Fast Ethernet to Fiber Media Converter, SC, Single-mode/30KM

JetCon 1301-s (WDM-A) Slim-sized Fast Ethernet to Fiber Media converter, simplex SC,
Single mode 30KM WDM A Type (Tx1310/Rx1550nm)

JetCon 1301-s (WDM-B) Slim-sized Fast Ethernet to Fiber Media converter, simplex SC,
Single mode 30KM WDM B Type (Tx1550/Rx1310nm)

Jetcon 1301-m(48V) Slim-sized Fast Ethernet to Fiber Media Converter, SC,
Multi-mode/ 2KM, for 48V DC(36~60V)

JetCon 1301-s(48V) Slim-sized Fast Ethernet to Fiber Media Converter, SC,
Single-mode/ 30KM, for 48V DC(36~60V)

error: