JetNet 7714G-M12 HVDC Endüstriyel 10 FE/8 PoE, 4GbE, Managed L3 Routing Switch

Technology

Standard

IEEE 802.3 10 Base-T Ethernet

IEEE 802.3u 100 Base-TX Fast Ethernet IEEE 802.3ab 1000 Base-T

IEEE 802.3x Flow Control and Back-pressure

IEEE 802.1AB Link Layer Discovery Protocol (LLDP) IEEE 802.1p Class of Service (CoS)

IEEE 802.1Q VLAN and GVRP

IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) IEEE 802.3ad Link Aggregation Protocol (LACP)

IEEE 802.1x Port Based Network Access Protocol

Performance

Switch Technology

Store and Forward Technology with Non-Blocking Switch Fabric

CPU performance

32 bits CPU with Hardware based Watch-dog timer with 10S reset down-counter

System Memory

32M bytes flash ROM, 256M bytes system RAM

Transfer packet size

64 bytes to 9K (9216) bytes Jumbo Frame

MAC Address

16K

Packet Buffer

1.5MBytes shared memory for packet buffer with intelligent memory management unit for burst data traffic 

Transfer performance

14,880pps for Ethernet and 148,800 for Fast Ethernet, 1488,100 for Gigabit Ethernet

Management

Management Interface

Telnet with SSH, Web Browser with SSL, SNMP V1/V2c/V3 with SNMP Trap (up to 4 trap stations), RMON (Group 1,2,3,9) for in-band management. Local RS-232 M12 connector for out-band management. Additional USB host interface for configuration Backup and Restore.

Management Security

The maximum management session up to four, and support management Host IP secure feature to prevent unauthorized remote login

SNMP MIB

MIB-II, Bridge MIB, Ethernet-like-MIB, VLAN MIB, IGMP MIB, Private MIB

NMS

Windows based NMS System –Korenix NMS and Korenix View for device discovery and network topology auto construct

Network Time Protocol

NTP with daylight saving and localize time sync function

Management IP Security

Predefined Host IP address for management host login security

E-mail Warning

4 Receipt E-mail accounts with E-mail server authentication

System Event Log

2 event log modes, Local and remote Log Server with authentication

System Auto Maintenance

System Power-On with configuration update, firmware auto upgrade when USB/M12 Flash installed

Network Performance

Port Configuration

Port link Speed, Link mode, current status and enable/disable

Port Trunk

IEEE 802.3ad Link Aggregation Control Protocol (LACP) and Static port trunk; trunk member up to 8 ports in one group, maximum 7 trunk groups

VLAN

IEEE 802.1Q Tag VLAN with 256 VLAN Entries and provides 2K GVRP entries; 3 VLAN link modes- Trunk mode, Hybrid mode and Link access mode

Private VLAN

The Private VLAN is special for group uplink access with independent port security. With the private VLAN function, each VLAN community is isolated and only exchange by high level device with primary VLAN community

IEEE 802.1Q QinQ

Supports Double VLAN tag for VLAN isolation and security

IEEE 802.1p

The Ethernet Switch MAC controller supports IEEE 802.1p Class of Service function; Per interface with 4 queues

IP Multicasting

Supports IGMP Snooping v1/v2c /v3 for multicast filtering and IGMP Query mode; also support unknown multicasting process forwarding policies- drop, flooding and forward to router port, 512 Multicasting Groups

Rate Control

Ingress/Egress filtering for broadcast, multicast, unknown DA or all packets

Port Mirroring

On-line traffic monitoring on multiple selected ports

DHCP

System supports DHCP Client function for dynamic IP address obtain from DHCP Server, and the Switch also support DHCP Server function with DHCP Relay Agent to forward DHCP request through specified forwarding path. The DHCP Server also offer Port Based DHCP Server function with predefined IP address or perform MAC&IP address binding function for field site DHCP client device easy replace

IEEE 802.1x/ Port Security

Port based network access control, and authenticated by localize pre-defined MAC address or remote RADIUS Server

Power over Ethernet

IEEE 802.3af/at, End-Span wiring architecture

PoE operating mode

Auto Mode: IEEE 802.3af/at behaviors with IEEE 802.3at 1-Event Classification for high power IEEE 82.3at PD device

Forced Mode: User configured Power consumption budget control with IEEE 802.3 PoE

/PD detection, or forced without PD detection

PoE forwarding conductor

M12 D-Code (Port 1~8): V+(1,3), V- (2,4)

Power forwarding capability

IEEE 802.3af:15W, IEEE802.3at:30W

PoE System Power Budget

Power Budget Reserve by PD declaration. The power budget control system will reserve power for connected PD device, once latest PD device (PoE 8) claimed power over the system surplus power, then the latest PoE will not be active.

System Power over Ethernet Power Budget: 100Watts (Max.)/ 70°C

Network Redundancy

Multiple Super Ring (MSRTM )

New generation Korenix Ring Redundancy Technology, Includes Rapid Super Ring, Rapid Dual Homing, TrunkRingTM, MultiRingTM , Super ChainTM and backward compatible with legacy Super RingTM

Rapid Dual Homing (RDHTM )

Multiple uplink paths to one or multiple upper Switch, up to 256 Groups RDH Peer protection

TrunkRingTM

Integrate port aggregate function in ring path to get higher throughput ring architecture

MultiRingTM

Supports redundant ring up to 7 rings in one device includes 5 Fast Ethernet rings and 2 Gigabit Ethernet rings

Super Chain

It is new ring technology with flexible and scalability, compatibility, and easy configurable. The ring includes 2 types of node Switch – Border Switch and Member Switch

Rapid Spanning Tree

IEEE 802.1D-2004 Rapid Spanning Tree Protocol; it compatible with Legacy Spanning Tree and IEEE 802.1w

Multiple Spanning Tree

IEEE 802.1s Multiple Spanning Tree, each MSTP instance can include one or more VLANs, and also supports multiple RSTP deployed in a VLAN or multiple VLANs

ITU-T G.8032 ERPS

Support ITU-T G.8032 ERPS V1 single ring topology, and ERPS v2 multiple rings with ladder topology

Loop Protection

The Loop Protection prevents any network looping caused by RSTP and MSR ring topology change

Routing Protocols

IP Routing

Supports Default Static and Dynamic Route

Virtual LAN Routing

Incorporate both of IEEE802.1Q Bridge and Routing Function

Routing Information Protocol

Hop-Based IP Routing with RIPv1 and RIPv2; 512 entries /256 entries for IPv4/IPv6 routing

IGMP

Multicast Group Management Protocol support IGMP v1,v2

Multicast Routing

128 IP Multicast Routing entries

DVMRP

HOP-Based multicast routing protocol, short of distance vector multicast routing protocol (2nd stage)

PIM-DM

Multicasting Routing Protocol, Short of Protocol Independent Multicast-Dense mode (2nd stage)

VRRP

Short of Virtual Route Redundancy Protocol, Automatically Backup Routing route to specified router

OSPF

Link State based IP routing protocol support OSPFv1 and OSPFv2 (2nd stage)

Interface

Enclosure port

100Mbps Fast Ethernet port (#1~#10): 10 x M12-D Female connectors with 8 ports IEEE 802.3at PoE/PSE (#1~#8)

M12-D (Conductor #): (#1) TX+/PoE V+, (#2) RX+/ PoE V-, (#3) TX-/PoE V+, (#4) RX-/ PoE V-

1000Mbps Gigabit Ethernet port (#11~#14): 4 x M12-A Female Connectors M12-A (Conductor #): (#1) 3N(Bi-DD-) , (#2) 3P(Bi-DD+), (#3)2N(Bi-DC-)

, (#4) 2P(Bi-DC+), (#5)1N(Bi-DB-), (#6)1P(Bi-DB+), (#7) 0N (Bi-DA-), (#8) 0P (Bi-DA+)

Serial Console/USB: M12-A 8-pins for console and USB Flash Disk

Power input port: M12-A 4-pin Male

Cables

100Base-TX: 2 pairs STP Cat.5e/Cat.6 cable, EIA/TIA-568B 100-ohm (length:100Meters) 1000Base-T: 4 pairs STP Cat. 5e/Cat.6 cable, EIA/TIA-568B 100-ohm (length:100Meters) Power Interface: 4  pins, 18 AWG, Strand Electric power cable

Diagnostic Indicator

100Mbps port: Link/Acrivity (Green on, Green Blinking), PoE Power on (Amber on)/ Port 1-8

1000Mbps port: Link/Activity (Green on, Green Blinking) Power: Power on (Green on)

Sys: Ready (Green on)

R.S: Green on (Ring Normal)/Blinking (wrong ring port connective), Amber on (Ring abnormal)/Blinking (ring port failed)

Power Requirements

System Power

HVDC: DC 110V (Un), Variation voltage from 77Vdc (0.7Un) to 137.5Vdc (1.25Un)

Power Consumption

23Watts (maximum) without PoE loading, DC77~137.5V 123Watts (maximum) with 100W PoE loading , DC77~137.5V

Mechanical

Installation

Wall Mounting

Dimensions

145.2mm(H) x 198mm (W) x 120mm (D)-without mounting ears 145.2mm(H) x 230.6mm (W) x 120mm (D)–with mounting ears

Material Housing

Steel Metal with Aluminum Heat Sink

Ingress Protection

IP30 protection

Environmental

Operating temperature

-40~70°C: 100Watts with PoE Loading

Operating humidity

0%~90%, non-condensing

Storage Temperature

40~85°C

Hi-Pot

AC 1KV for Power- Enclosure Interface

Regulatory Approvals

Railway Application

Compliance with EN50155-Electric Equipment on Rolling Stock

EMC

EMI: IEC/EN61000-6-2, Compliance with EN50121-1/-4 /-3-2, CE class A, FCC sub part-15 class-A

EMS: IEC/EN61000-6-4, Compliance with EN50121-1/-4/-3-2, EN61000-4-2/-4-3/-4-4/-4- 5/-4-6/-4-8/-4-9

Vibration & Shock

Compliance with IEC 61373