JetCon 2201-w Industrial RS-232/422/485 Converter
JetCon 2201-w Industrial RS-232/422/485 Converter The standard RS-232 protocol has been widely used in most of industrial computer systems for serial port communication. However, it has its limitations in terms of transmission speed, range and networking capabilities. Furthermore, the RS-422 and RS-485 standards have overcome the limitations mentioned above by utilizing different voltage lines for data and control signals. Hence, JetCon 2201-w series, the RS-232 to RS422/485 converter becomes very popular to be deployed in the industrial communication network for longer distance and higher reliability.
JetCon 2201-w Industrial RS-232/422/485 Converter
-
Automatic RS-232 to RS-422/485 converter
-
Auto baud rate and direction control
-
High speed up to 921.6 Kbps
-
RS-422/485 3000VDC isolation protection (JetCon 2201i-w/2201i-wTB)
-
Supports RX bias and terminal resistor
-
Easy configuration by DIP switch without resetting power
-
Din-Rail mount and wall mount robust aluminum case
-
Terminal block 5-pin at RS-232 (JetCon 2201i-wTB)
-
-40~70°C operating temperature for hazardous environment
-
RoHS applications
Technology
Standard:
EIA/TIA-232 RS-232 (ITU-T v.28)
EIA/TIA-422 RS-422 (ITU-T v.11)
EIA/TIA-485 RS-485 (ISO/IEC8284)
Interface
Forwarding Rate: Auto baud rate 300 to 921.6Kbps
Port:
RS-232 x1
RS-422 x1
RS-485 2/4 wire x1
Connector:
RS-232: DB-9 Female (JetCon 2201i-w)
RS-232: Terminal block (JetCon 2201i-wTB)
RS-422/485: Removable terminal block
Link Distance:
RS-232: 50 feet
RS-422: 4000 feet
RS-485: 4000 feet
Serial Signals:
RS-422: TxD+, TxD-, RxD+, RxDRS-485 4 wires: TxD+, TxD-, RxD+, RxDRS-485 2 wires: Data+, DataSignal Ground
Configuration DIP Switch:
DIP-switch 1,2: RS-422/485 wiring mode selection
DIP-switch 3,4: RS-422/485 line terminator selection
DIP-switch 5,6: RS-422/485 biasing resistor selection
DIP-switch has plate (JetCon 2201i-wTB)
Diagnostic LED:
System power (Pwr): Green
Receive Data (Rx):Yellow blinking
Transmit Data (Tx): Green blinking
Power Requirements
System Power:
DC 12~48V input with polarity reverse correction.
Power Consumption: 1 Watt (max.)
Mechanical
Installation: Wall mount or DIN Rail mount
Case: Aluminum metal case
Dimensions: 24.7mm(H) x 74mm (W) x99 mm (D)
Weight:
0.24kg with package
0.15kg without package
Environmental
Operating Temperature: -40 ~70OC
Operating Humidity: 0% ~ 90% (non-condensing)
Storage Temperature: -40 ~ 80OC
Storage Humidity: 0%~ 95% (non-condensing)
Regulatory Approvals
EMI:
FCC class B, CE/EN55022 class B
CE/EN61000-3-2:2001 Harmonic test
CE/EN61000-3-3: 1995 Flicker test
Shock: IEC60068-2-27
Vibration: IEC60068-2-6
Free Fall: IEC60068-2-32
MTBF: 5366,967 Hours ,MIL-HDBK-217F
Warranty: 5 Years
JetCon 2201-w Industrial RS232 to RS422/485 Rail Converter, -40~70OC operating Temp.
JetCon 2201i-w Industrial RS232 to RS422/485 Rail Converter, 3KV isolation,-40~70OC operating Temp.
JetCon 2201i-wTB Industrial RS232 to RS422/485 Rail Converter, 3KV isolation,-40~70OC operating Temp.