1. Home
  2. Ürünlerimiz
  3. Endüstriyel Çeviriciler
  4. Ethernet Fiber Çeviriciler
  5. JetCon 2302 2-Channel Fast Ethernet to Fiber Media Converter

JetCon 2302 2-Channel Fast Ethernet to Fiber Media Converter

JetCon 2302 2-Channel Fast Ethernet to Fiber Media Converter JetCon 2302 is not only a compact 4-port switch, but also a 2 channel RJ45 to fiber media converter - an ideal model that would physically fit in harsh environments with intensive severe electromagnetic interference. In switch mode, JetCon 2302 is an Industrial 4-port 10/100Mbps Fast Ethernet Fiber Switch, incorporating 3.2Gbps switching fabric with non-blocking store and forward technology to fulfill the high transmission performance requirements. In converter mode, JetCon 2302 is an Industrial 2-channel 10/100 TX to 100 FX media converter, with an alarm relay to trigger out a real alarm signal for port or power events. To avoid interferences as well as to extend the network coverage, Single-mode or Multi-mode fiber optic ports meet your needs for up to 30KM long distance transmission. In addition, to withstand under hazardous environmental conditions, JetCon 2302 provides dual redundant power inputs with wide DC10~60V range, 1.5KV Hi-Pot isolation protection and wide operating temperature for avoiding any power interruption and providing reliable network performance. With its rugged aluminum case, CE/ FCC regulatory approvals and 5-year global warranty, JetCon 2302 is your reliable choice for industrial field site applications.

Category:

JetCon 2302 2-Channel Fast Ethernet to Fiber Media Converter

  • Two Channels 10/100 TX to 100 FX media converter

  • Two 10/100TX with 2 100FX Fast Ethernet Fiber Switch

  • Dual Forwarding modes- Switching and Pure converter

  • Supports Auto MDI/MDI-X, Auto Negotiation

  • Supports Multi-mode 2KM, Single-mode 30KM

  • 3.2Gbps Non-Blocking Switch Fabric

  • Fault Alert for port and power

  • Redundant 10~60V DC Power inputs with DC polarity protection

  • Supports AC 1.5KV Hi-Pot isolation protection

  • EN 50121-3-2 Railway EMC compliance (applying)

  • Operating temperature -25~75°C (-40~75°C wide operating temperature model available by request)

Technology

Standard:

IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3u 100Base-FX

IEEE 802.3x Flow Control and Back  Pressure

Performance

Switch Technology: 3.2 Gbps Store and Forwarding Technology

System forwarding performance: 1.19 Mega packets per second, 64 bytes packet size. (Switch  Mode)

14880  pps  for  10Base-T 148810 pps for 100Base-TX/ FX

Mac address: 1K MAC address entries with automatic learning and aging (Switch Mode  only)

Packet Buffer: 512Kbits shared memory Forwarding Technology: Store and Forward Operating Mode:

Converter/Switch mode selected by DIP switch Switch Mode: data exchange on 4 ports (Channel A, B exchange)

Converter mode: data forwarding on independent channel (A, B)

Digital Output: Dry Relay Output with 1A @24V DC  ability

Interface

Ethernet copper port: 2 × 10/100TX ports with Auto MDI/ MDI-X, Auto Negotiation, flow control and back-pressure enabled (Switch mode)

Fiber port: 2 × 100Mbps Fiber port, SC flow control and back-pressure disabled JetCon 2302-m: Multi-mode (Channel A,B) JetCon 2302-s: Single-mode (Channel A,B) Cables:

RJ-45 Connector:

10Base-T: 2-pairs UTP/STP Cat-3,4 TIA/EIA 568-B cable, 100 meters

100Base-TX : 2/4 pairs UTP/STP Cat.5 TIA/EIA 568-B cable, 100 meters

Fast Ethernet Fiber Transceiver:

JetCon 2302-m: 2KM distance, 50~62.5/125um Multi-mode fiber cable.

JetCon 2302-s: 30KM distance,8~10/125um Single-mode fiber cable.

Diagnostic LEDs:

System Power (Green on) : Power 1 ,  2

Relay Alarm: Active (Red)

Op. Mode: Convert (Green on)

Fiber Ethernet Port(Channel A/B): Link/Activity (Green on/ Yellow Blinking)

Ethernet Port: Link/Activity (Green on/Yellow  Blinking)

Reset Button: For Operating mode change DIP Switch 1~4: Port Event Alarm Control, Enable(On)/ Disable (Off)

DIP Switch 5: Operating mode select, Converter mode (On)/ Switch mode (Off) DIP Switch 6: Power Event Alarm Control, Enable(On)/ Disable (Off)

DIP Switch 7: Not available

Power Connector: Removable Terminal Block Digital Output: Removable Terminal Block Power  Requirements

System power: DC 10~60V with polarity reverses  correction.

Supports Positive/Negative power system System power consumption: 6Watts / DC 24V Mechanical

System Installation: DIN Rail  installation

Enclosure protection: Ingress Protection code – 30 Dimensions: 99 (D) x55(W)x 120(H), unit:mm (without Din-rail kit)

Weight: 0.49Kg w/o packing

Environmental

Operating Temperature:

-25 ~75°C (JetCon 2302-w: -40~  75°C)

Operating Humidity: 0% ~ 95%  (non-condensing)

Storage Temperature: -40 ~ 75°C

Storage Humidity: 0%~ 95%  non-condensing

Hi-Pot: AC 1.5KV on port to port and port to power EMC: Compliant with EN 50121-3-2 EMC Regulatory  Approvals

EMI: CE/EN 61000-6-4,  CISPR-16-1-2:2003,

CISPR-16-2-1:2003,  CISPR-16-2-3:2006, CISPR-22

:2005+A1 :2005(9.6), FCC part 15B Class A

EMS: CE/ EN 61000-6-2 :2005

IEC 61000-4-2 :2008, IEC 61000-4-3 :2006+A1  :2007,IEC

61000-4-4 :2004, IEC 61000-4-5 :2005, IEC 61000-4-6  :2008,

IEC 61000-4-8 :1993+A1 :2000

Shock: IEC 60068-2-27

Vibration: IEC 60068-2-6

Free fall: IEC 60068-2-32

DS_JetCon2302_V1.0

JetCon 2302-m 2-Channel Fast Ethernet to Fiber Media Converter, SC, Multi-mode/ 2KM JetCon 2302-s 2-Channel Fast Ethernet to Fiber Media Converter, SC, Single-mode/ 30KM

error: