1. Home
  2. Ürünlerimiz
  3. Endüstriyel Çeviriciler
  4. Ethernet Gateway
  5. JetCon 2502 Industrial Ethernet over VDSL2 Extender

JetCon 2502 Industrial Ethernet over VDSL2 Extender

JetCon 2502 Industrial Ethernet over VDSL2 Extender JetCon 2502 is an Ethernet/POTS to VDSL2 (Very High-Rate Digital Subscribe Loop -2) extender and is compliant with ITU-T G.993.2 standard. It allows carriers to deliver Ethernet data up to 100Mbps in both upstream and downstream over existing twisted copper. The Ethernet/POTS (Plain Old Telephone Service) converter features Discrete Multi-Tone modulator/ de-modulator and VDSL Analog Front End (AFE) technology; it is an ideal solution to carry POTS signal and Ethernet Data stream to 3000 feet to extend local LAN and voice on the same line.

Category:

JetCon 2502 Industrial Ethernet over VDSL2 Extender

  • IEEE 802.3u 100Base-TX Fast Ethernet Converter

  • IEEE 802.3x Flow control & Back-pressure

  • ITU-T G.993.2 VDSL2 standard

  • 2 x RJ-11 connectors for POTS/ISDN and VDSL 2

  • One RJ-45 10/100Mbps Fast Ethernet Port

  • Built-in POTS/ISDN Splitter

  • Extends Voice and Ethernet transmission distance to 1KM

  • Transparent 1792 bytes packet size

  • Quality of service with broadcast packet filtering for data precedence transmission

  • DC 12~48V Power input by power jack and terminal block

  • Supports AC 1.5KV Hi-Pot isolation protection

  • Operating temperature -40~70°C

Technology

Standard:

IEEE 802.3 10 Base-T IEEE 802.3u 100 Base-TX

IEEE 802.1p Class of Service IEEE 802.1Q Quality of Service ITU-T G.993.2 VDSL2

Performance

Forwarding Technology: Store and Forward technology with 64 ~1792 bytes packet forwarding  ability

Switch Packet Buffer: 384Kbits

Mac Table: 2K with 300 Sec agent time

Class of Service: 4 Packet forwarding queues with 1 (Lowest):4 (Low):8 (High):15 (Highest) WRR (weighted round robin) forwarding schematics

Quality of Service: VLAN tag priority, IPv4 packet precedence and IPv6 ToS.

Broadcast filtering: Fast Ethernet: 200 packet / per sec. @ 100Mbps; 20 packet / per sec. @  10Mbps

Interface

Number of Ports: 1x 10/100Mbps Fast Ethernet port with Auto MDI/MDI-X function

Auto-Negotiation

1x Line for ISDN/POTS 1x VDSL2

Connectors: 10/100 Base-TX: RJ-45 with auto MDI/MDI-X, Auto-Negotiation

ISDN/POTS: RJ-11 VDSL2: RJ-11

Cables: RJ-45 Fast Ethernet port: Cat.4,5, 4-pairs UTP cable, up to 100 meters

VDSL2: 1pairs of UTP cable, up to 3000 feet. Line: Integrated ISDN/POTS

Configuration DIP Switch:

DIP-1 (Mode selection): On (Master) / Off  (Slave)

DIP-2 (Impulse protection):On (Interleave)/ Off (Fast) ; Interleave mode with less than 250ms forwarding latency, Fast mode is less than 2ms forwarding latency.

DIP-3 (Rate Control): On (Non-Symmetric )/Off (Symmetric) DIP-4 (SNR Control): On (6dB)/ Off  (9dB)

300bps to 921.6Kbps

Diagnostic LED:

System Power: Power on (Green on)

Fast Ethernet Port: Speed (100 Mbps: Yellow On), Link/Activity: Green on ( Link at 10 or 100Mbps), Green Blinking ( packet is on transmitting)

Master (Green On): Device operating under Master Mode VDSL Link/ Negotiation (Green): On/ Link, Blinking/ Negotiation

Power Requirements

System Power:

DC Jack: 12~48V, Ø 2mm Center Pin

Terminal block: DC 12~48V, 3-Pin terminal block with earth ground. Power input with polarity reverse  protection.

Power Consumption: 5Watts @DC  24V(Maximum)

Mechanical

Installation: Wall Mount or DIN-Rail  mount

Casing: Aluminum metal case

Dimensions: 29mm (H) x 88mm(W) x 114mm  (D)

Environmental

Operating Temperature: -40 ~70OC

Operating Humidity: 0% ~ 95%  (non-condensing)

Storage Temperature: -40 ~ 80OC

Storage Humidity: 0%~ 95% (non-condensing) Hi-Pot: Ethernet port AC 1.5KV for port to power Regulatory  Approvals

EMI: FCC Class A; CE/EN55022 class A

EMC Immunity Interface:

IEC 61000-4-2, IEC61000-4-3, IEC61000-4-4, IEC61000-4-5, IEC61000-4-6, IEC61000-4-8 Shock: IEC60068-2-27

Vibration: IEC60068-2-6

Free Fall: IEC60068-2-31

DS_JetCon2502_V1.1

JetCon 2502 Industrial Ethernet over VDSL2 converter, 600  Ohm

error: