JetLink 2108 Yönetilebilir Switch support EtherNet/IP

JetLink 2108 Managed Switch support EtherNet/IP

• 8 ports 10/100 Base-T Fast Ethernet RJ-45

• Supports EtherNet/IP Protocol for Factory Automation

• Provides EtherNet/IP EDS (Electronic Data Sheet) file, AOI (Add-On Instructions) file, and FactoryTalk® View faceplate

• SNMP v1/v2c/v3, WEB, Standard MIB, Private MIB

• Layer 2 Network Performance – Port based VLAN, GVRP, IGMP Snooping v1/v2/v3, MLD Snooping, Storm Control, Link Aggregation

• Layer Security: Static, Dynamic, MAC address filtering

• Software Feature: TFTP, HTTP, Dual Image

• JetLink Ring: High-speed recovery time less than 20ms

• Wide Temperature design -40~75^oC

• Dual 12-48V Wide Power Input

• IP 30 Metal Case Protection

Technology
Standard IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3x flow control and back-pressure.
IEEE802.1p Class of Service
IEEE802.1D Spanning Tree Protocol (STP)
IEEE802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE802.1s Multiple Spanning Tree Protocol (MSTP)
IEEE802.1p class of service
IEEE802.1X Port based Network Access Control
IEEE802.3AD Link Aggregation Protocol (LACP)
IEEE802.3az Energy Efficient Ethernet
IEEE802.1Q Quality of Service
Performance
Forwarding
Technology Store and Forward Technology 1.6Gbps with Non-Blocking Switch Fabric
System Throughput 1.5MBytes shared memory for packet buffer with intelligent memory management unit for burst
data traffic
MAC Address 8k
Jumbo Frame 9216Bytes
Event Alarm Configurable relay alarm output for port or power events
Class of Service 4 queues for each port with 8:1 forwarding scheme for High/Low queue
Quality of Service Supports Tag based packet priority, IPv4 ToS and IPv6 DSCP
Korenix Technology www.korenix.com 3
Power Requirement
Power Removable Terminal Block: 12-48V power Input
Power input with polarity reverse correction and over current protection.
Power Consumption 8 Watts / DC 24V
Mechanical
Enclosure Protection Ingress Protection code – 30
Case Slim metal case
Mounting DIN Rail
Dimension 84(D) X 43(W)x 120(H) mm (Without Din-rail kit)
Weight 0.6 kg without package
Interface
Ethernet Port – RJ-45 8 x 10/100 Base-TX
Connectors 10/100Base-TX: RJ-45
Terminal block: 4-Pin for redundant power input; 2-Pin for alarm relay output.
Cables RJ-45 Connector: 4 pairs of Cat-5e UTP/STP cable
Maximum link distance is 100meters.
Diagnostic LEDs System:
– 2 x Power: On (Power On), Off (Power Off)
– 1 x Alarm: On (Disconnect), Off (Connected)
– 1 x Status: On (Loop), Off (Non-Loop)
Power Connector Removable Terminal Block: 12-48V power Input
Environmental
Operating Temperature -40℃~75℃
Operating Humidity 10% ~ 95% non-condensing
Storage Temperature -40℃~85℃
Storage Humidity 10%~ 95% non-condensing
Approvals
EMI CE/EN 55032 class A, FCC Class A, EN 61000-3-2 :2014, EN 61000-3-3, EN 61000-6-4
EMS CE/ EN 55024, EN 61000-6-2, IEC 61000-4-2,IEC 61000-4-3, IEC 61000-4-4,
IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11
Safety UL508, Class 1 Division 2, ATEX (Compliance)
Shock IEC60068-2-27 (Compliance)
Vibration IEC60068-2-6 (Compliance)
Free Fall IEC60068-2-32 (Compliance)
MTBF 4,177,000 hours

DS_JetLink2108_V1.0

JetLink 2108 Industrial 8FE Managed Ethernet Switch support EtherNet/IP