JetNet 6910G-M12 Endüstriyel 7 FE/PoE, 1GbE/PoE, 2GbE Managed High Power PoE Switch

The JetNet 6910G-M12 is new generation power over Ethernet Switch with rugged M12 connectors for IP surveillance in hashed environment, like as Train, MRT and LRV systems. It adapts 8 ports PoE/PSE in 7 ports Fast Ethernet and 1 Gigabit interfaces, and 2 Gigabit interfaces with device fault bypass function. The PSE system enabled 30W high power PoE function and compliance with IEEE 802.3af/at standard. The Switch system also adapts railway electrical power system and supports several types of input voltage rating to correspond different train electrical power system. With above major features, the JetNet 6910G-M12 is helpful to construct IP surveillance network on train with multi-backup features to ensure passenger’s safety and train network reliability.

JetNet 6910G-M12, Tren, MRT ve LRV sistemleri gibi karma ortamlarda IP gözetimi için sağlam M12 konektörlere sahip yeni nesil PoE (Ethernet üzerinden besleme) Switch dir. Cihaz 7 Fast Ethernet, 1 Gigabit arayüzünde 8 port PoE/PSE , ve arıza baypas fonksiyonlu 2 gigabit porta uyarlıdır. PSE sistemi, 30W yüksek güçlü PoE işlevi ve IEEE 802.3af/at standardına olanak sağlar. Switch sistemi ayrıca demiryolu elektrik güç sistemine adapte olur ve farklı trenlerin elektrik güç sistemine karşılık gelen çeşitli giriş voltajı değerlerini destekler. Yukarıdaki ana özelliklere sahip JetNet 6910G-M12, yolcu güvenliği ve tren ağı güvenilirliğini sağlamak için çoklu yedekleme özelliği ile trende IP gözetim ağı oluşturur.

JetNet 6910G-M12 Series Industrial 7 FE/PoE, 1GbE/PoE, 2GbE Managed High Power PoE Switch

  • 7 Fast Ethernet M12 D-code , 3 Gigabit M12- X-code , M12-A Power, M12-A Console/USB

  • Rugged M12 Ethernet, Power, Management connector to prevent damages from shock and vibration

  • 8 IEEE 802.3at PSE allocated to 7 Fast Ethernet ports and 1 Gigabit Ethernet port

  • 2 Gigabit Ethernet interfaces support Device Fault Bypass function

  • Railway Power System design with 100W PoE budget in compliance with safety requirements

  • Network Redundancy – MSR (Multiple Super Ring),ITU-T G.8032 ERPS, RSTP, MSTP, Super Chain

  • Fully Device Management – SNMP v1/v2c/v3, RMON, Web UI, Telnet and Local Console

  • Friendly Device and Network Topology recovery Utility – Korenix View, Korenix NMS

  • Advanced Network Security –MAC Security, IEEE 802.1x Port Based access control , IEEE 802.1x Radius Server authentication

  • Layer 2 Network Performance – IEEE802.1Q VLAN, Private VLAN, Trunk, Traffic Filtering, DHCP Server/Client, Traffic Prioritize, Forwarding Rate Control

  • Real Hardware Watchdog against internal system malfunction

  • Railway power system – 110V (HVDC model), 24V (LVDC model)

  • Railway Standards- EN50155, EN50121-3-2,IEC61373

Technology

Standard

IEEE 802.3u 100Base-TX IEEE 802.3ab 1000Base-T

IEEE 802.3x Flow Control and Back-pressure IEEE 802.3af Power over Ethernet

IEEE 802.3at High power PoE

IEEE 802.1AB Link Layer Discovery Protocol (LLDP) IEEE 802.1Q VLAN and GVRP

IEEE 802.1D Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) IEEE 802.3ad Link Aggregation Protocol (LACP)

IEEE 802.1x Port Based Network Access Protocol

Performance

Switch Technology

Store and Forward technology with 32Gbps switching fabric

System Throughput

8.3Mega packets per second, 64Bytes packet length

CPU performance

180Mhz ARM-9E /200MIPS performance with 10 seconds hardware based Watch-dog timer

System Memory

8Mega Bytes Flash ROM, 64Mega Bytes RAM

Transfer packet size

64Bytes ~1522Bytes (include double Tag VLAN)

MAC Address

8K MAC address table

Packet Buffer

1Mega bits shared packet buffer

Transfer performance

14,880pps for Ethernet, 148,800 for Fast Ethernet and 1488,100 for Gigabit Ethernet

Management

Configuration, Monitoring Interface

•     In-Band Management: Telnet with SSH, Web-Browser with SSL, IPv4/IPv6 SNMP V1/V2c/V3 with SNMP Trap (4 Trap Stations), RMON Groups (1,2,3,9)

•     Out-Band Management: Local RS-232 /RJ-45 connector with CISCO like command

System Manage Secure

•     Telnet/ Local Console support command like interface with Cisco like commands, and offers 4 management sessions only; the system support SSL for HTTP security, SSH for Telnet security

•     Mange station secure by IP address and up to 4 Manage stations

•     Remote Management login authentication by Radius account/password, key for RADIUS Server authentication

SNMP MIB

MIB II, Bridge MIB, Ethernet Like MIB, VLAN MIB, IGMP MIB, Private MIB

Management Utility

Korenix View and Korenix NMS for device finding and network topology discovery

Network Time Protocol

NTP with daylight saving, localize time synchronize function

IEEE 1588 PTP

IEEE 1588 v1

E-mail Warning

4 receipts E-mail accounts with mail server authentication

System event log

Local and remote log server with authentication

System Auto Maintenance

Power on firmware upgrade, and configuration update by USB/Memory sticker

Network Performance

Port Configuration

Port Link Speed, Link Mode, Link Status and Port Enable/Disable

Port Trunk/Link Aggregation

IEEE 802.3ad port aggregation and static port trunking, trunk member up to 8 ports, maximum trunk group up to 4 include Gigabit Ethernet port

VLAN

IEEE 802.1Q Tag VLAN with 256 VLAN entries, GVRP supported VLAN Link Modes: Trunk, Hybrid and Link Access

IEEE 802.1 QinQ

Double VLAN Tag with 1522 bytes frame size

Traffic Prioritize

4 physical queues, supports weighted fair queuing (WRR) and strict priority scheme, follows COS tag ID, IPv4 ToS/DiffServ information to prioritize the traffic

Multicasting

IGMP Snooping v1/v2c/v3 for multicasting filtering and forwarding with IGMP Query mode, and also support unknown multicasting forwarding policies- drop, flooding to all ports and forward to router port

Rate Control

Ingress/Egress filtering for Broadcast, Multicast, Unknown DA or all packets

Port Mirroring

Online Traffic monitoring on multiple selected target ports

Port Security

Only permit link partner which with predefined MAC address to access the Ethernet interface

DHCP

DHCP Client/Server with IP & MAC address binding, DHCP Relay Agent function and DHCP Server with static port based IP assigned function

IEEE 802.1x

Port Based Network Access Control with EAPoL to permit or Deny interface access with Remote RADIUS Server authentication

Power over Ethernet

IEEE 802.3af/at, End-Span wiring architecture

PoE operating mode

Auto Mode: IEEE 802.3af/at behaviors with IEEE 802.3at 1-Event for high power IEEE 82.3at 1-event PD device

Forced Mode: User configured Power consumption budget control with IEEE 802.3 PoE /PD detection, or forced without PD detection

PoE forwarding conductor

M12 D-Code (Port 1~7): V+(1,3), V- (2,4) / M12 X-Code (Port 8): V+ (1,2), V- (3,4)

Power forwarding capability

IEEE 802.3af:15W, IEEE802.3at:30W

PoE System Power Budget

Power Budget Reserve by PD declaration. The power budget control system will reserve power for connected PD device, once latest PD device (PoE 8) claimed power over the system surplus power, then the latest PoE will not be active.

System Power Budget: 100Watts / 70°C

Network Redundancy

Multiple Super Ring (MSRTM )

New generation Korenix Ring Redundancy Technology, Includes Rapid Super Ring, Rapid Dual Homing, TrunkRingTM, MultiRingTM , Super ChainTM and backward compatible with legacy Super RingTM

Rapid Dual Homing (RDHTM )

Multiple uplink paths to one or multiple upper Switch, up to 256 Groups RDH Peer protection

TrunkRingTM

Integrate port aggregate function in ring path to get higher throughput ring architecture

MultiRingTM

Couple or multiple up to 10 Rapid Super Rings in one device, JetNet 6910G supports up to 5 100M rings or 4 100M rings, 1 1000M ring

Super Chain

It is new ring technology with  flexible and scalability, compatibility, and easy configurable. The ring includes 2 types of node Switch – Border Switch and Member Switch

Rapid Spanning Tree

IEEE 802.1D-2004 Rapid Spanning Tree Protocol. Compatible with Legacy Spanning Tree and IEEE 802.1w

Multiple Spanning Tree

IEEE 802.1s Multiple Spanning Tree, each MSTP instance can include one or more VLANs, and also supports multiple RSTP deployed in a VLAN or multiple VLANs

ITU-T G.8032 ERPS

Support ITU-T G.8032 ERPS V1 single ring topology

Loop Protection

The Loop Protection prevents any network looping caused by RSTP and MSR ring topology change

System Fault Bypass

Link Partner Bypass function on Gigabit port 9,10. Both of Gigabit ports will form as inter- connected mode when switch power shut-down or unstable /non-ready

Interface

Enclosure Port

•  100 Base-TX/100Mbps Fast Ethernet: 7 x M12 D-Code, 4-pin, Female

M12-D (Conductor #): (#1) TX+/PoE V+, (#2) RX+/ PoE V-, (#3) TX-/PoE V+, (#4) RX-/ PoE V-

•  1000 Base-T/Gigabit Ethernet (Port #8~#10): 3 x M12-X Code 8-pin Female

M12-X (Conductor #): (#1) 0P(DA+)/PoE V+, (#2) 0N(DA-)/PoE V+, (#3)1P(DB+)/PoE V-

, (#4)1N(DB-)/PoE V-, (#5)3P(DC+) (#6)3N(DC-), (#7) 2N (DB-), (#8) 2P (DC+)

•  Console & USB: M12 A-Code 8-pin Female for RS-232 and USB 2.0 Host for firmware/configuration update

•  Power: M12 A-Code 4-pin Male

•  100 Base-TX: 2-pair Cat.5E / Cat.6  FTP/STP cable, EIA/TIA 568B 100-ohm, 100Meters

•  1000 Base-T: 4-pair Cat.5E/Cat.6 FTP/STP cable, EIA/TIA 568B 100Ohm, 100Meters It is recommended uses FTP/STP cable for the railway on-board application

RS-232 & USB

M12 A-Code female 8-pin connector

•  RS-232: TxD (Pin-1), RxD (Pin-2), Signal Ground (Pin-3)

•  USB Host: USB-DATA+ (Pin-5),USB-DATA- (Pin-6), USB-5V(Pin-7), USB-GND (Pin-8)

LED Indicators

100Mbps (Port 1~7): Link (Green on)/Activity (Green Blinking) 1000Mbps (Port 8~10): Link (Green on)/Activity (Green Blinking)

PoE (IEEE 802.3af/ Green): Power forwarding (Green on), PoE Detection (Green Blinking) PoE (IEEE 802.3at/ Blue): Power forwarding (Blue on), PoE Detection (Blue Blinking)

Power: System Power Ready (Green on)

Sys: System Ready (Green on), System Updating (Green Blinking)

R.S.: Ring Normal(Green on)/ Wrong ring port connective(Green blinking), Ring abnormal (Amber on)/ Device’s ring port disconnect (Amber blinking)

Power Requirement

System Power

•  JetNet 6910G-M12 HVDC

Typical Input voltage: DC 110V (Un), Variation voltage 77V (0.7Un)~137.5V (1.25Un)

•  JetNet 6910G-M12 LVDC

Typical Input voltage: DC24V (Un), Variation voltage 16.8V (0.7Un)~30V (1.25Un)

Power consumption

HVDC: 25Watts (maximum) without PoE/PD loading, DC77~137.5V 125Watts (maximum) with 100W PoE/PD loading, DC77~137.5V

LVDC: 20Watts (maximum) without PoE /PD loading, DC16.8~30V 120Watts (maximum) with 100W PoE/PD loading, DC16.8~30V

Mechanical

Installation

Wall Mounting

Enclosure Material

Steel Metal with textured paint

Ingress Protection

IP-30

Dimension (mm)

145.2 mm (H) x 198 mm (W) x 120 mm (D)

Environmental

Operating Environment

-40°C~70°C (100Watts PoE/PD Loading), 0~90%, Non-condensing

Storage Environment

-40°C~80°C, 0~90% Non-Condensing

Hi-Pot

AC 1.2KV for ports-power, power-case

Approvals

Railway Standard

EN50155, IEC 61373, EN50121-3-2

EMC

EMI: EN50121-3-2/EN50121-1, FCC Class A, IEC/EN61000-6-4 EMS:EN50121-3-2/EN50121-1, IEC/EN61000-6-2

IEC/EN61000-4-2,IEC/EN61000-4-4, IEC/EN61000-4-5, IEC/EN61000-4-6, IEC/EN61000-4-8, IEC/EN61000-4-9

Variation/Shock

IEC 61373

Warranty

5 Years

JetNet 6910G-M12 HVDC

Industrial 10-port M12 Managed PoE Switch, 7 FE/M12-D PoE, 1 GbE/M12-X PoE, 2 GbE/M12-X with Bypass, Typical Power Input DC 110V, -40~70C, 100W PoE

JetNet 6910G-M12 LVDC

Industrial 10-port M12 Managed PoE Switch, 7 FE/M12-D PoE, 1 GbE/M12-X PoE, 2 GbE/M12-X with Bypass, Typical Power Input DC 24V, -40~70C, 100W PoE

Accessory (by option)

M12 USB Flash Disk, 4GBytes

error: